An electric chainsaw is a powerful and essential tool for maintaining and trimming trees or cutting logs. To ensure it performs at its best and has a long life, it’s important to clean it regularly. Here is a step-by-step guide on how to effectively clean an electric chainsaw:
Step 1: Clean the fuel tank and spark plug
The fuel tank is a crucial component of the electric chainsaw that must be kept clean to prevent issues with starting and operating the saw. To clean the fuel tank, remove the fuel by draining it into a container. Use a strong solvent such as sodium hydroxide to remove any dirt or debris. After the tank is clean, check the spark plug and clean it with the same solvent.
Step 2: Clean the guide bar, air filter, and chain
To clean the guide bar and air filter, use a compressed air cleaner and take care to apply the cleaner slowly and carefully to avoid causing any damage. Once the chain is removed, use a brush to scrub the guide bar if it’s clogged with dirt or debris. After cleaning the guide bar and air filter, remove the chain and clean it by using a wire brush.
Step 3: Wipe down the body and lubricator
Wipe down the body of the saw using a wire brush or paintbrush. Check the automatic chain bar lubricator and add fresh oil if necessary. To clean the carburetor, run a wire brush or paintbrush across the body of the saw.
Step 4: Clean the spark arrestor
Clean the spark arrestor regularly to prevent any sparks from escaping the machine. Use a thin screwdriver to clean the inside of the rope rotor, and then wipe down the rest of the engine, clutch lever, and cooling fins with a delicate paintbrush. Remove the top cover to avoid any dust buildup.
Step 5: Clean the armature and fuel filter
Remove the blade and chain to access the motor. Clean the armature with compressed air to prevent any potential clogging. When cleaning the brushes and armature, use a new paintbrush to avoid any damage to the motor. Remove the fuel filter and soak it in a strong solvent such as sodium hydroxide to prevent any type of grease from forming. Rinse the filter with water and ensure it is completely dry before storing the saw.
Step 6: Clean the chain and bar
Before cleaning the electric chainsaw, remove the nuts holding the chain to the powerhead. Use a stiff paintbrush to clean the chain and wipe the bar with a cloth to remove any debris that may have built up in the chain groove. Replace the spark plug if the saw is plugged in and still not running, check the oil reservoir, and replace it if necessary.
You have a clean electric chainsaw!
By following these six steps, you can effectively clean your electric chainsaw and ensure maximum performance and longevity of the tool. Regular cleaning is essential to prevent any potential issues and maintain the saw’s durability. If you’re unsure about cleaning your electric chainsaw, consult your manual or contact a professional for assistance.
Jake is a tool guy – think Tim Allen from Home Improvement but with a much drier sense of humor. He lives in the great state of Ohio and plays the guitar on his downtime. He also spends his time writing on all things tools and DIY-related as this is his passion.